Projects

Small Device C Compiler

SDCC is a retargettable, optimizing ANSI - C compiler that targets the Intel 8051, Maxim 80DS390, Zilog Z80 and the Motorola 68HC08 based MCUs. Work is in progress on supporting the Microchip PIC16 and PIC18 series. SDCC is Free Open Source Software, distributed under GNU General Public License (GPL).

libopenstm32

A free/libre/open-source firmware library for STM32 microcontrollers.

OpenSCB

OpenSCB goal is to create a fully open source servo controller. That means that we have designed a board with all the hardware to interface with classic RC servos, AX-12/AX-18 servos, openservo and more... It's using a powerful 32-bits micro-controller and it has an USB port for programming ... [More] and control with a PC. The schematic and layout will be available and you will be able to use them and customize them as you need. To go with this board, we have built an embedded software which let you use all the feature of the board. We tried to keep the design as flexible as possible so you should be able to reuse only the part you need from the software. We are also developing a graphical interface for your computer to configure, calibrate and control the board. [Less]

ChibiOS/RT embedded RTOS

ChibiOS/RT is a compact and fast RTOS designed for embedded applications. It offers threads, mutexes, semaphores, messages, events, timers, flexible I/O with timeout capability. ARM7, Cortex-M3, AVR, MSP430 and x86 are currently supported.

EasyMSP

EasyMSP Is a project aiming to make developing and prototyping on the MSP430 fast and easy by providing a set of C libraries, drivers, and hardware.

ectool

ectool is a small utility that dumps the RAM of a laptop's Embedded/Environmental Controller (EC).

Curuxa

Curuxa is an open source electronics and robotics modular educative prototyping platform. It consists in a collection of tutorials, electronic boards and modules that can be connected to each other, and full applications showing how to build complex devices using these circuits. Curuxa Main ... [More] Boards and Modules can be used for prototyping or implementing fast and easily any kind of electronic device, robots, domotic applications... and is also intended to be used in classes and workshops for educative purposes. All electronic circuits are intended to be built at home using basic and cheap tools. All source code can be compiled on (almost) any operating system using free software compilers. [Less]