Projects

BT747

Project to control GPS Dataloggers, mainly MTK based and convert GPS logs to several other formats using filters, etc. Runs on most platforms (Desktops, Linux, Mac, Palm, Mobile Phone, PocketPC).

SharpGPS

GPS library for .NET 2.0 and .NET 2.0 Compact Framework. Supports parsing of NMEA, relaying raw RTCM data either through custom protocol, or via NTRIP for enhanced accuracy.

vlkGPS

simple GPS navigation for java phones (J2ME) and recording of tracks. Supports internal and external GPS. (JSR-179 / JSR-82 ). Good for Geocaching.

NMEAParser

NMEA Parser library for parsing NMEA 0183 and 2000 data from compatible devices, log files and internal generation system to allow for simulation without actual hardware.

gps-reader

Perl script to read and control NMEA devices in Linux and Windows. Output is controlled by command line switches, and is suitable for use in shell scripts. Can also run in continuous mode, logging to disk and writing output to files in binary and text formats.

rgm3800py

Hinweise auf Deutsch stehen weiter unten auf dieser Seite! Access Royaltek RGM-3800 and compatible GPS dataloggerWith this command line utility you can: Dump tracks off your RGM-3800 GPS datalogger in NMEA and GPX format. List tracks with information. Configure logging format and interval. Check ... [More] memory usage. Erase all tracks. This tool was tested with MacOS X, Linux and Windows. You only need a decent Python interpreter (version 2.4 or newer, 2.3 might also do) and a PL2303 USB driver (included in Linux, for OS X you could use this one). This tool works on non-x86 CPUs (e.g. old Powerbooks). On Windows you'll also need pywin32 and pyserial. If you use rgm3800py and would like to be notified about new features please subscribe to the announcement group: rgm3800py-announce (This supports RSS/Atom feeds!) If you have a problem or an idea for improvements please send email to petersen.karsten@gmail.com Contributors welcome! Royaltek RGM-3800 und kompatible GPS Datenlogger auslesenDies ist ein Programm fuer die Kommandozeile, es erlaubt u.a.: Tracks im NMEA und GPX Format ausgeben. Liste der aufgezeichneten Tracks anzeigen. Logging-Format und -Interval einstellen. Speicherverbrauch feststellen. Alle Tracks löschen. Dieses Programm wurde unter MacOS X, Linux und Windows getestet. Sie brauchen ein halbwegs aktuelles Python (Version 2.4 oder neuer, evtl. funktioniert auch 2.3) und einen USB Treiber fuer den PL2303 Chip (bei Linux schon dabei, fuer OS X z.B. diesen hier). Dieses Programm funktioniert auch auf nicht-Intel-kompatiblen CPUs (z.B. alte Powerbooks). Für Windows wird zusätzlich pywin32 und pyserial benötigt. Wenn Sie dieses Programm benutzen und über Neuigkeiten informiert werden möchten dann abonnieren Sie bitte diese Mailingliste/RSS-Feed: rgm3800py-announce Bei Fragen, Problemen und Ideen schreiben Sie bitte eine EMail an petersen.karsten@gmail.com Mitentwickler sind immer willkommen! [Less]

truckpc

TruckPCTruckPC is a Python project for offroad truck (old ones ;-) ) enthusiasts under Linux that: 1. visualise sensors (eg temperature) and put watchdogs, 2. read a GPS and display coordinates, speed, course and 3. have tripmaster functionality. Everything touchscreen ready ... and ... [More] future-functionality: CAN-bus sensor reading ! TruckPC DreamOur dream is to have the TruckPC fully functional in a nowadays Dakar / Africa Race Offroad Truck ! Today Functionalitiesread sensors with Arduinoread standard analog 180ohm VDO sensors read analog 100ohm sensors (eg. temperature) read analog 1000ohm sensors (eg. temperature) read ticks from hall sensor (eg. standard Japanese probe from www.Tripmaster.co.uk) read GPS over serial portread basic NMEA GPS sentences over serial port show GPS information (coordinates, speed, course, satelites) Tripmaster alike functionality ( TruckTrip )2 types of calibration subcounter, counter and global counter counting up and down use hall sensor probe or GPS probe speed Much moreput color + sound watchdogs on every sensor show 6 most important sensors in big pitch on the screen logging of all the GPS and sensor information logging of all the TrickTrip information Future Functionalitieswill be: integrate GPS maps for navigation on course, at least a plotting from points show a calibrated (Google) map on the background integrate external button for TruckTrip optimize some screens: show sensors small at every screen, adapt GPS screens registration of waypoints with comments intregrate CAN bus reading (to get rit of the old sensors and to integrate with modern CAN bus systems). We might need the ELM327 ? make the software ready for use with Dummy-arduino data and Dummy-GPS data, just to make testing easier ... your suggestions TestingThe platform was very succesfull tested during Europes most severe offroad rally: the Dresden-Breslau in a Mercedes Unimog 416 truck. The software runs on a compact Via Pico-ITX motherboard bootable from compact flash with Puppy Linux 2.18 on a 8.5inch touchscreen with a Haicom GPS mouse. The hardware was tested under high shocks, dust and high temperatures ! Searching for teammembers !If you're interested in joining the development team, contact me: joris_dot_peumans_at_prato_dot_be ScreenshotsScreenshots available under section Downloads [Less]

marnav

Open source recreational marine navigation software. Poseidon/Neptune sculpture in Copenhagen Port.

gps2iis

translate NMEA and provide an IIS webservice with data

CapCode-software suite for sailors

CapCode is a navigation software for sailors for cruising or regatta. - Reads NMEA 183 data (instruments, GPS, AIS). Implements computation of the VMG , tracing on RNC charts (ENC ongoing). Display the polar on the chart, future position of the ship.